Poles & Lighting Infrastructure · Tura
Auroguard supplies High Mast Pole in Tura, Meghalaya direct from our factory. Heavy-duty multi-lux galvanized steel polygonal high mast lighting structures engineered with automated internal winch raising-and-lowering systems for industrial ports, highways, and public arenas.
Direct Manufacturer Supply
Auroguard Private Limited manufactures elite-grade High Mast Poles, heavy engineering structures designed to illuminate massive public, commercial, and industrial zones with maximum area coverage and zero structural compromise. Fabricated from premium high-yield carbon steel sheets, these soaring structures feature a continuously tapered polygonal geometry (typically 12-sided, 16-sided, or 20-sided) designed to withstand extreme dynamic wind forces and aerodynamic vortex shedding. Each high mast is supplied as a modular, stress-fit slip-joint system containing an integrated, internal motorized stainless steel winch raising-and-lowering mechanism. This specialized gear assembly allows the top headframe luminaire carriage ring to be lowered safely to ground level, eliminating the need for expensive cherry-picker cranes or hazardous high-altitude maintenance climbs. Fully hot-dip galvanized for complete long-term protection against harsh atmospheric corrosion, they are universally specified for critical regional infrastructure hubs—including commercial sea ports, international airport runways, high-speed national highway interchanges, industrial rail yards, and massive open-air sports stadium plazas.
For Tura projects, Auroguard delivers High Mast Pole with a typical transit window of 5-7 days via the most cost-effective corridor. Finish and packaging are matched to highest rainfall in India, near-permanent slope wetting — supporting corridors such as NH-6 Shillong–Silchar and East Khasi Hills roads.
In the Northeast region the focus is hill-road safety and slope protection. Auroguard supplies against BOQ, chainage schedule or tender extract — directly from the engineering desk that quotes your project.
Technical Specifications
| Specification | Value |
|---|---|
| Material Base Grade | High-Yield Structural Carbon Steel conforming to IS:2062 \| S355 / ASTM A572 Standards |
| Structural Geometry | Continuously Tapered Polygonal Section (12, 16, or 20 Symmetrical Longitudinal Sides) |
| Pole Installation Heights | 12.00 Meters \| 16.00 Meters \| 20.00 Meters \| 25.00 Meters \| 30.00 Meters \| 40.00 Meters Large Spans |
| Assembly Joining Method | High-Precision Mechanical Slip-Fit Jointing Overlap Systems (No Site Welding Required) |
| Winch Raising Mechanism | Internal Motorized Stainless Steel Dual-Drum Wire Rope Winch with Self-Lubricating Power Pack |
| Zinc Galvanization Layer Mass | Certified Minimum 610 g/m² Heavy Hot-Dip Coating (IS:2629 / IS:4759 Standards) |
| Luminaire Carriage Configuration | High-Capacity Aerodynamic Steel Ring and Headframe for 4 to 24 Heavy Floodlights |
| Wind Speed Design Load | Standard Structural Integrity rated up to 180 km/h (Custom Engineered up to 220 km/h) |
| Primary Infrastructure Utility | Container Sea Ports, Airport Aprons, National Highway Interchanges, Open-Air Stadium Plazas |
Auroguard Private Limited fabricates High Mast Pole for road, highway, industrial and institutional projects across Tura and the wider Northeast region. Engineered to the applicable IRC, MoRTH and IS specifications, every consignment is finished for highest rainfall in India, near-permanent slope wetting and dispatched factory-direct — with no third-party markup.
From expressway works to industrial estates, our High Mast Pole supports projects on corridors such as NH-6 Shillong–Silchar and East Khasi Hills roads. Forward your tender extract and the engineering desk quotes your Tura project directly.
Industrial procurement mandates precision. Our High Mast Pole is manufactured with strict adherence to rigorous engineering criteria, ensuring hassle-free approval for your official public works or corporate tenders in Tura. Below are the verified technical specifications for this product:
| Specification | Value |
|---|---|
| Material Base Grade | High-Yield Structural Carbon Steel conforming to IS:2062 \| S355 / ASTM A572 Standards |
| Structural Geometry | Continuously Tapered Polygonal Section (12, 16, or 20 Symmetrical Longitudinal Sides) |
| Pole Installation Heights | 12.00 Meters \| 16.00 Meters \| 20.00 Meters \| 25.00 Meters \| 30.00 Meters \| 40.00 Meters Large Spans |
| Assembly Joining Method | High-Precision Mechanical Slip-Fit Jointing Overlap Systems (No Site Welding Required) |
| Winch Raising Mechanism | Internal Motorized Stainless Steel Dual-Drum Wire Rope Winch with Self-Lubricating Power Pack |
| Zinc Galvanization Layer Mass | Certified Minimum 610 g/m² Heavy Hot-Dip Coating (IS:2629 / IS:4759 Standards) |
| Luminaire Carriage Configuration | High-Capacity Aerodynamic Steel Ring and Headframe for 4 to 24 Heavy Floodlights |
| Wind Speed Design Load | Standard Structural Integrity rated up to 180 km/h (Custom Engineered up to 220 km/h) |
| Primary Infrastructure Utility | Container Sea Ports, Airport Aprons, National Highway Interchanges, Open-Air Stadium Plazas |
All specifications conform to applicable IRC, MORTH, IS and project-specific tender requirements. Mill test certificates, dimensional reports and inspection support documents accompany every dispatch.
Procurement economics rely heavily on localised efficiency. To ensure the lowest possible landing costs and predictable delivery timelines, Auroguard Private Limited coordinates all material dispatches to align perfectly with your specific project site logistics in Tura.
| Logistics Parameter | Project Execution Protocol |
|---|---|
| Primary Destination | Direct, on-site offloading at your active project coordinates or commercial storage yards anywhere within Tura and surrounding zones. |
| Supply Chain Routing | Consignments are systematically optimised and routed to ensure the material reaches your location via the most practical, cost-effective transit corridor available for Tura. |
| Freight Configuration | Material bundling is mathematically structured based on volumetric weight to secure the most competitive commercial freight rates per metric ton for your specific district. |
| On-Site Readiness | All necessary transit clearances, technical test certificates and weight records are compiled and shared directly with your procurement team upon vehicle dispatch. |
Procurement Assurance: By managing end-to-end transit dynamics directly to your location, we eliminate unnecessary supply chain middleman costs and protect your project's strict implementation deadlines in Tura.
Our distribution model is structured to facilitate rapid on-site offloading directly to major project coordinates, localised industrial estates and transit warehouses throughout Tura and surrounding economic belts in Meghalaya. The regional infrastructure focus — hill-road safety and slope protection — aligns directly with our High Mast Pole supply profile. We provide comprehensive pan-India technical support to streamline your material onboarding and installation timelines.
Q1: What is the standard lead time for High Mast Pole delivered to Tura?
For standard consignments, the road transit window from our Kolkata factory is approximately 5-7 days. Bulk-tonnage rail dispatch is routed through the Guwahati goods yard. Faster dispatch can be organised on request.
Q2: Does the High Mast Pole supplied to Tura meet IRC / MoRTH / IS specifications?
Yes. Every supply is produced to the applicable IRC, MoRTH and IS specifications. Material test certificates, coating reports and inspection-support documents accompany every dispatch — formatted for procurement sign-off.
Q3: Can High Mast Pole be fitted to existing project infrastructure in Tura?
Yes. Our systems are engineered for compatibility with standard mounting hardware, project-spec accessories and supporting structural elements. Fitment guidance and drawings come at no extra cost.
Move your Tura project forward today. Contact our commercial sales desk to receive custom technical drawings and direct factory pricing — with no third-party markup.
Common Questions
Auroguard Private Limited is a leading manufacturer and supplier of High Mast Pole in Tura and across India, supplying direct from the factory to NHAI, MoRTH, PWD, EPC contractors and industrial buyers — no middlemen.
Typical transit for High Mast Pole to Tura is 5-7 days depending on order size and finish, dispatched via the most practical corridor. Urgent tender-time dispatch can be arranged on confirmation.
Yes. High Mast Pole supplied by Auroguard in Tura is manufactured to the applicable MoRTH, IRC and IS specifications, with material test certificates and tender documentation provided on request.
Yes. Auroguard regularly handles bulk and tender quantities of High Mast Pole in Tura for national highways, state highways, smart-city programs, industrial estates and EPC works.
Yes. Every supply of High Mast Pole in Tura is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
You deal directly with the desk that quotes, manufactures and ships — factory-direct pricing, engineered finishes, BOQ-ready quotations and pan-India dispatch to Tura, with no middlemen.
Also in Tura
Continuously tapered, aerodynamic hot-dip galvanized steel poles engineered for architectural street lighting, smart city surveillance, and high-wind structural resilience.
View details
Modern 8-sided continuously tapered hot-dip galvanized steel poles engineered for stable street lighting, urban CCTV surveillance, and high-wind structural resilience.
View details
Tubular steel poles for utility, lighting and industrial applications.
View detailsQuantity, destination and specification — we respond directly.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.