Road Marking & Delineation · Purnia
Auroguard supplies Thermoplastic Road Marking Paint in Purnia, Bihar direct from our factory. Buy certified high-visibility thermoplastic road marking paint from Auroguard Private Limited. Fully compliant with MORT&H Section 803 specifications.
Direct Manufacturer Supply
Auroguard Private Limited supplies premium-grade Thermoplastic Road Marking Paint engineered for high-consequence traffic delineation, highway lane striping, and urban intersection markings. Formulated from an advanced synthetic resin matrix, aggregate materials, pigment binders, and intermixed retroreflective glass beads, this hot-melt compound provides exceptional chemical fusion with both asphalt and concrete substrates. The material dynamics require a precise application melting temperature between 180°C and 200°C, producing a high-thickness, fast-setting wear layer that minimizes traffic disruption. To ensure continuous nighttime visibility and optimal retroreflectivity, the formulation integrates a minimum percentage of intermixed glass beads, supplemented by a pressurized drop-on bead application during hot extrusion. The cured thermoplastic film demonstrates severe resistance to plastic deformation under high-ambient temperatures, heavy commercial wheel-load friction, and aggressive UV degradation. As an elite supply chain partner and strategic distributor, Auroguard Private Limited guarantees tight manufacturing tolerances on luminance factors, softening points, and drying times, providing municipal infrastructure developments with superior long-term cost efficiencies and extended wear lifespans.
For Purnia projects, Auroguard delivers Thermoplastic Road Marking Paint with a typical transit window of 3-4 days via the most cost-effective corridor. Finish and packaging are matched to flood-plain alluvial soils requiring sub-grade reinforcement — supporting corridors such as NH-19 Golden Quadrilateral and PMGSY rural road upgrades.
In the East India region the focus is East-West expressway upgrades and Ganga bridges. Auroguard supplies against BOQ, chainage schedule or tender extract — directly from the engineering desk that quotes your project.
Technical Specifications
| Specification | Value |
|---|---|
| Material Formulation | Binder Resin, Glass Beads, Titanium Dioxide/Yellow Pigment, Inert Fillers |
| Regulatory Compliance | BS 3262 (Part 1), AASHTO M249, IRC:35 |
| MORT&H Specifications | Section 803 (Road Markings using Thermoplastic Materials) |
| Luminance Factor (White) | Minimum 70% to 80% (Conforming to AASHTO parameters) |
| Softening Point | 102.5°C ± 9.5°C (Ensuring thermal stability on high-temperature asphalt) |
| Drying Time / Track-Free | ≤ 10 Minutes at ambient temperatures |
| Glass Bead Intermix Content | Minimum 10% to 20% by weight (Conforming to BS/MORT&H mandates) |
| Application Thickness | 2.5 mm up to 5.0 mm depending on project striping mandate |
Auroguard Private Limited fabricates Thermoplastic Road Marking Paint for road, highway, industrial and institutional projects across Purnia and the wider East India region. Engineered to the applicable IRC, MoRTH and IS specifications, every consignment is finished for flood-plain alluvial soils requiring sub-grade reinforcement and dispatched factory-direct — with no third-party markup.
From expressway works to industrial estates, our Thermoplastic Road Marking Paint supports projects on corridors such as NH-19 Golden Quadrilateral and PMGSY rural road upgrades. Forward your tender extract and the engineering desk quotes your Purnia project directly.
Industrial procurement mandates precision. Our Thermoplastic Road Marking Paint is manufactured with strict adherence to rigorous engineering criteria, ensuring hassle-free approval for your official public works or corporate tenders in Purnia. Below are the verified technical specifications for this product:
| Specification | Value |
|---|---|
| Material Formulation | Binder Resin, Glass Beads, Titanium Dioxide/Yellow Pigment, Inert Fillers |
| Regulatory Compliance | BS 3262 (Part 1), AASHTO M249, IRC:35 |
| MORT&H Specifications | Section 803 (Road Markings using Thermoplastic Materials) |
| Luminance Factor (White) | Minimum 70% to 80% (Conforming to AASHTO parameters) |
| Softening Point | 102.5°C ± 9.5°C (Ensuring thermal stability on high-temperature asphalt) |
| Drying Time / Track-Free | ≤ 10 Minutes at ambient temperatures |
| Glass Bead Intermix Content | Minimum 10% to 20% by weight (Conforming to BS/MORT&H mandates) |
| Application Thickness | 2.5 mm up to 5.0 mm depending on project striping mandate |
All specifications conform to applicable IRC, MORTH, IS and project-specific tender requirements. Mill test certificates, dimensional reports and inspection support documents accompany every dispatch.
Procurement economics rely heavily on localised efficiency. To ensure the lowest possible landing costs and predictable delivery timelines, Auroguard Private Limited coordinates all material dispatches to align perfectly with your specific project site logistics in Purnia.
| Logistics Parameter | Project Execution Protocol |
|---|---|
| Primary Destination | Direct, on-site offloading at your active project coordinates or commercial storage yards anywhere within Purnia and surrounding zones. |
| Supply Chain Routing | Consignments are systematically optimised and routed to ensure the material reaches your location via the most practical, cost-effective transit corridor available for Purnia. |
| Freight Configuration | Material bundling is mathematically structured based on volumetric weight to secure the most competitive commercial freight rates per metric ton for your specific district. |
| On-Site Readiness | All necessary transit clearances, technical test certificates and weight records are compiled and shared directly with your procurement team upon vehicle dispatch. |
Procurement Assurance: By managing end-to-end transit dynamics directly to your location, we eliminate unnecessary supply chain middleman costs and protect your project's strict implementation deadlines in Purnia.
Our distribution model is structured to facilitate rapid on-site offloading directly to major project coordinates, localised industrial estates and transit warehouses throughout Purnia and surrounding economic belts in Bihar. The regional infrastructure focus — East-West expressway upgrades and Ganga bridges — aligns directly with our Thermoplastic Road Marking Paint supply profile. We provide comprehensive pan-India technical support to streamline your material onboarding and installation timelines.
Q1: What is the standard lead time for Thermoplastic Road Marking Paint delivered to Purnia?
For standard consignments, the road transit window from our Kolkata factory is approximately 3-4 days. Bulk-tonnage rail dispatch is routed through the Patna goods yard. Faster dispatch can be organised on request.
Q2: Does the Thermoplastic Road Marking Paint supplied to Purnia meet IRC / MoRTH / IS specifications?
Yes. Every supply is produced to the applicable IRC, MoRTH and IS specifications. Material test certificates, coating reports and inspection-support documents accompany every dispatch — formatted for procurement sign-off.
Q3: Can Thermoplastic Road Marking Paint be fitted to existing project infrastructure in Purnia?
Yes. Our systems are engineered for compatibility with standard mounting hardware, project-spec accessories and supporting structural elements. Fitment guidance and drawings come at no extra cost.
Move your Purnia project forward today. Contact our commercial sales desk to receive custom technical drawings and direct factory pricing — with no third-party markup.
Common Questions
Auroguard Private Limited is a leading manufacturer and supplier of Thermoplastic Road Marking Paint in Purnia and across India, supplying direct from the factory to NHAI, MoRTH, PWD, EPC contractors and industrial buyers — no middlemen.
Typical transit for Thermoplastic Road Marking Paint to Purnia is 3-4 days depending on order size and finish, dispatched via the most practical corridor. Urgent tender-time dispatch can be arranged on confirmation.
Yes. Thermoplastic Road Marking Paint supplied by Auroguard in Purnia is manufactured to the applicable MoRTH, IRC and IS specifications, with material test certificates and tender documentation provided on request.
Yes. Auroguard regularly handles bulk and tender quantities of Thermoplastic Road Marking Paint in Purnia for national highways, state highways, smart-city programs, industrial estates and EPC works.
Yes. Every supply of Thermoplastic Road Marking Paint in Purnia is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
You deal directly with the desk that quotes, manufactures and ships — factory-direct pricing, engineered finishes, BOQ-ready quotations and pan-India dispatch to Purnia, with no middlemen.
Also in Purnia
Heavy-duty, high-visibility cast aluminum alloy road markers engineered with dual-directional reflective lenses and solid anchoring stems for permanent highway lane delineation.
View details
Buy certified retroreflective road sign boards from Auroguard Private Limited. Fully compliant with MORT&H Section 800 standards for highway safety.
View details
Buy high-visibility polycarbonate retroreflective road studs and cat's eyes from Auroguard Private Limited. Certified commercial highway markers.
View detailsQuantity, destination and specification — we respond directly.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.