Road Marking & Delineation · Port Blair
Auroguard supplies Aluminium Road Studs in Port Blair, Andaman and Nicobar Islands direct from our factory. Heavy-duty, high-visibility cast aluminum alloy road markers engineered with dual-directional reflective lenses and solid anchoring stems for permanent highway lane delineation.
Direct Manufacturer Supply
Auroguard Private Limited manufactures premium-grade Aluminium Road Studs (raised pavement markers), structurally engineered to deliver maximum nocturnal visibility and traffic lane discipline on high-speed national highways, expressways, and dangerous flyover curves. Pressure die-cast from high-strength aircraft-grade aluminum alloy, these heavy-duty road reflectors feature an exceptional load-bearing capacity that easily withstands continuous pounding from heavy commercial multi-axle truck tyres without cracking or deforming. Equipped with advanced multi-vane retro-reflective prismatic lenses or glass beads on both faces, they reflect vehicle headlights with intense brightness from extreme distances, safely guiding drivers through heavy monsoonal downpours, thick winter fog, and unlit rural corridors. Every stud is designed with a contoured, aerodynamic profile that creates a distinct tactile and acoustic "rumble" warning when a vehicle veers out of its lane. Featuring a textured, solid bottom anchoring stem, our aluminum road markers ensure a permanent mechanical bond with asphalt or concrete pavements using high-viscosity epoxy resins.
For Port Blair projects, Auroguard delivers Aluminium Road Studs with a typical transit window of 10-14 days via the most cost-effective corridor. Finish and packaging are matched to highest humidity, salt spray, cyclone exposure — supporting corridors such as NH-4 Andaman Trunk Road.
In the South India region the focus is island road safety + jetty links. Auroguard supplies against BOQ, chainage schedule or tender extract — directly from the engineering desk that quotes your project.
Technical Specifications
| Specification | Value |
|---|---|
| Material Base Composition | Heavy-Duty Marine/Aircraft Grade Cast Aluminium Alloy Matrix |
| Reflector Lens Engineering | Dual-Directional High-Intensity Retro-Reflective PMMA Prismatic Lenses / Glass Element Inserts |
| Reflector Color Configurations | Crystal White, Vivid Amber Yellow, Emergency Red, Environmental Green |
| Compressive Load Capacity | High Structural Integrity Rated ≥ 20 up to 30 Metric Tons Failure Resistance |
| Anchor Stem Dimension | 50 mm \| 60 mm Length Solid Textured Anti-Twist Base Shank |
| Body Shell Dimensions | Standard 100 mm x 100 mm x 20 mm Low-Profile Aerodynamic Geometric Contour |
| Pavement Bond Profile | Grooved Slip-Resistant Bottom Pattern Optimized for Bituminous Epoxy Anchoring |
| Weathering Durability Index | Absolute Immunity to Ultraviolet (UV) Rays, Road Salts, Extreme Summer Heat, and Tyre Friction |
| Primary Infrastructure Utility | National Highway Lane Delineation, Expressway Median Edge Marking, Sharp Curve Boundaries, Airport Taxiway Guidance |
Auroguard Private Limited manufactures Aluminium Road Studs for road, highway, industrial and institutional projects across Port Blair and the wider South India region. Manufactured to the applicable IRC, MoRTH and IS specifications, every consignment is treated for highest humidity, salt spray, cyclone exposure and dispatched factory-direct — no middlemen, no routing.
From state highway upgrades to smart-city programs, our Aluminium Road Studs supports projects on corridors such as NH-4 Andaman Trunk Road. Share your BOQ and the engineering desk quotes your Port Blair project directly.
Industrial procurement mandates precision. Our Aluminium Road Studs is manufactured with strict adherence to rigorous engineering criteria, ensuring hassle-free approval for your official public works or corporate tenders in Port Blair. Below are the verified technical specifications for this product:
| Specification | Value |
|---|---|
| Material Base Composition | Heavy-Duty Marine/Aircraft Grade Cast Aluminium Alloy Matrix |
| Reflector Lens Engineering | Dual-Directional High-Intensity Retro-Reflective PMMA Prismatic Lenses / Glass Element Inserts |
| Reflector Color Configurations | Crystal White, Vivid Amber Yellow, Emergency Red, Environmental Green |
| Compressive Load Capacity | High Structural Integrity Rated ≥ 20 up to 30 Metric Tons Failure Resistance |
| Anchor Stem Dimension | 50 mm \| 60 mm Length Solid Textured Anti-Twist Base Shank |
| Body Shell Dimensions | Standard 100 mm x 100 mm x 20 mm Low-Profile Aerodynamic Geometric Contour |
| Pavement Bond Profile | Grooved Slip-Resistant Bottom Pattern Optimized for Bituminous Epoxy Anchoring |
| Weathering Durability Index | Absolute Immunity to Ultraviolet (UV) Rays, Road Salts, Extreme Summer Heat, and Tyre Friction |
| Primary Infrastructure Utility | National Highway Lane Delineation, Expressway Median Edge Marking, Sharp Curve Boundaries, Airport Taxiway Guidance |
All specifications conform to applicable IRC, MORTH, IS and project-specific tender requirements. Mill test certificates, dimensional reports and inspection support documents accompany every dispatch.
Procurement economics rely heavily on localised efficiency. To ensure the lowest possible landing costs and predictable delivery timelines, Auroguard Private Limited coordinates all material dispatches to align perfectly with your specific project site logistics in Port Blair.
| Logistics Parameter | Project Execution Protocol |
|---|---|
| Primary Destination | Direct, on-site offloading at your active project coordinates or commercial storage yards anywhere within Port Blair and surrounding zones. |
| Supply Chain Routing | Consignments are systematically optimised and routed to ensure the material reaches your location via the most practical, cost-effective transit corridor available for Port Blair. |
| Freight Configuration | Material bundling is mathematically structured based on volumetric weight to secure the most competitive commercial freight rates per metric ton for your specific district. |
| On-Site Readiness | All necessary transit clearances, technical test certificates and weight records are compiled and shared directly with your procurement team upon vehicle dispatch. |
Procurement Assurance: By managing end-to-end transit dynamics directly to your location, we eliminate unnecessary supply chain middleman costs and protect your project's strict implementation deadlines in Port Blair.
Our distribution model is structured to facilitate rapid on-site offloading directly to major project coordinates, localised industrial estates and transit warehouses throughout Port Blair and surrounding economic belts in Andaman and Nicobar Islands. The regional infrastructure focus — island road safety + jetty links — aligns directly with our Aluminium Road Studs supply profile. We provide comprehensive pan-India technical support to streamline your material onboarding and installation timelines.
Q1: What is the typical lead time for Aluminium Road Studs shipped to Port Blair?
For standard consignments, the road transit window from our Kolkata factory is around 10-14 days. Bulk-tonnage rail dispatch is routed through the Port Blair goods yard. Urgent tender-time dispatch can be arranged on confirmation.
Q2: Does the Aluminium Road Studs supplied to Port Blair meet IRC / MoRTH / IS specifications?
Yes. Every supply is fabricated to the applicable IRC, MoRTH and IS specifications. Mill test certificates, coating reports and inspection-support documents accompany every dispatch — ready for direct submission to project consultants.
Q3: Can Aluminium Road Studs be matched to existing project infrastructure in Port Blair?
Yes. Our systems are designed for compatibility with standard mounting hardware, project-spec accessories and supporting structural elements. Installation drawings and technical clarifications are provided at no additional cost.
Get your Port Blair requirement quoted fast. Reach the Auroguard desk directly to receive an itemised material breakdown and direct factory pricing — straight from the people who manufacture and ship.
Common Questions
Auroguard Private Limited is a leading manufacturer and supplier of Aluminium Road Studs in Port Blair and across India, supplying direct from the factory to NHAI, MoRTH, PWD, EPC contractors and industrial buyers — no middlemen.
Typical transit for Aluminium Road Studs to Port Blair is 10-14 days depending on order size and finish, dispatched via the most practical corridor. Urgent tender-time dispatch can be arranged on confirmation.
Yes. Aluminium Road Studs supplied by Auroguard in Port Blair is manufactured to the applicable MoRTH, IRC and IS specifications, with material test certificates and tender documentation provided on request.
Yes. Auroguard regularly handles bulk and tender quantities of Aluminium Road Studs in Port Blair for national highways, state highways, smart-city programs, industrial estates and EPC works.
Yes. Every supply of Aluminium Road Studs in Port Blair is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
You deal directly with the desk that quotes, manufactures and ships — factory-direct pricing, engineered finishes, BOQ-ready quotations and pan-India dispatch to Port Blair, with no middlemen.
Also in Port Blair
Buy certified retroreflective road sign boards from Auroguard Private Limited. Fully compliant with MORT&H Section 800 standards for highway safety.
View details
Buy high-visibility polycarbonate retroreflective road studs and cat's eyes from Auroguard Private Limited. Certified commercial highway markers.
View details
Buy certified high-visibility thermoplastic road marking paint from Auroguard Private Limited. Fully compliant with MORT&H Section 803 specifications.
View detailsQuantity, destination and specification — we respond directly.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.