Road Marking & Delineation · Navsari
Auroguard supplies Road Studs or Cat's Eye in Navsari, Gujarat direct from our factory. Buy high-visibility polycarbonate retroreflective road studs and cat's eyes from Auroguard Private Limited. Certified commercial highway markers.
Direct Manufacturer Supply
Auroguard Private Limited distributes commercial-grade Polycarbonate Retroreflective Road Studs, engineered for heavy-duty traffic delineation, lane division, and high-consequence night visibility. Molded from premium, high-impact structural polycarbonate resin, these highway markers exhibit exceptional compressive load-bearing capacity, sustaining repeated high-velocity impacts from heavy commercial vehicles without structural failure, cracking, or material displacement. The engineered mechanical design features a solid bottom anchoring stem or specialized ribbed base plates that anchor deep into asphalt or concrete substrates using high-strength structural epoxies, effectively preventing displacement caused by high-speed vehicular shear forces. The retroreflective surface integrates advanced microprismatic lens technology or highly reflective PMMA lenses hermetically sealed within the impact-resistant housing. This advanced optical configuration ensures superior wide-angle retroreflectivity under adverse weather, dense fog, and low-light conditions. As an elite supply chain specialist and distributor, Auroguard Private Limited ensures that all units meet strict manufacturing tolerances, offering optimal resistance to UV degradation, oil stains, and tire friction, thereby providing major infrastructure and municipal projects with exceptional long-term cost efficiencies.
For Navsari projects, Auroguard delivers Road Studs or Cat's Eye with a typical transit window of 6-7 days via the most cost-effective corridor. Finish and packaging are matched to arid + coastal mix, salt-laden air near Kandla and Mundra — supporting corridors such as Delhi–Mumbai Expressway and Mumbai–Ahmedabad bullet train corridor.
In the West India region the focus is Delhi–Mumbai Expressway DMIC and port corridors. Auroguard supplies against BOQ, chainage schedule or tender extract — directly from the engineering desk that quotes your project.
Technical Specifications
| Specification | Value |
|---|---|
| Material Base Composition | High-Strength Cast Aluminium Alloy (Conforming to ASTM B85 / IS 617) |
| Reflective Element Type | Microprismatic Polycarbonate Lens / PMMA Reflectors |
| Compressive Load Rating | Certified to withstand ≥ 20 Metric Tons |
| Regulatory Compliance | IRC:35 (Indian Roads Congress), ASTM D4280, EN 1463-1/2 |
| MORT&H Specifications | Section 800 (Traffic Signs, Markings & Appurtenances) |
| Lens Dimensions / Colors | Amber, White, Red (Bi-directional or Uni-directional) |
| Anchoring Mechanism | Integrated solid bottom stem (50 mm length) with structural epoxy bonding |
| Weathering Durability | UV-stabilized, high abrasion resistance, absolute water ingress protection |
Auroguard Private Limited produces Road Studs or Cat's Eye for road, highway, industrial and institutional projects across Navsari and the wider West India region. Built to the applicable IRC, MoRTH and IS specifications, every consignment is prepared for arid + coastal mix, salt-laden air near Kandla and Mundra and dispatched factory-direct — direct from the desk that quotes and ships.
From national highway corridors to EPC contracts, our Road Studs or Cat's Eye supports projects on corridors such as Delhi–Mumbai Expressway and Mumbai–Ahmedabad bullet train corridor. Send your requirement and the engineering desk quotes your Navsari project directly.
Industrial procurement mandates precision. Our Road Studs or Cat's Eye is manufactured with strict adherence to rigorous engineering criteria, ensuring hassle-free approval for your official public works or corporate tenders in Navsari. Below are the verified technical specifications for this product:
| Specification | Value |
|---|---|
| Material Base Composition | High-Strength Cast Aluminium Alloy (Conforming to ASTM B85 / IS 617) |
| Reflective Element Type | Microprismatic Polycarbonate Lens / PMMA Reflectors |
| Compressive Load Rating | Certified to withstand ≥ 20 Metric Tons |
| Regulatory Compliance | IRC:35 (Indian Roads Congress), ASTM D4280, EN 1463-1/2 |
| MORT&H Specifications | Section 800 (Traffic Signs, Markings & Appurtenances) |
| Lens Dimensions / Colors | Amber, White, Red (Bi-directional or Uni-directional) |
| Anchoring Mechanism | Integrated solid bottom stem (50 mm length) with structural epoxy bonding |
| Weathering Durability | UV-stabilized, high abrasion resistance, absolute water ingress protection |
All specifications conform to applicable IRC, MORTH, IS and project-specific tender requirements. Mill test certificates, dimensional reports and inspection support documents accompany every dispatch.
Procurement economics rely heavily on localised efficiency. To ensure the lowest possible landing costs and predictable delivery timelines, Auroguard Private Limited coordinates all material dispatches to align perfectly with your specific project site logistics in Navsari.
| Logistics Parameter | Project Execution Protocol |
|---|---|
| Primary Destination | Direct, on-site offloading at your active project coordinates or commercial storage yards anywhere within Navsari and surrounding zones. |
| Supply Chain Routing | Consignments are systematically optimised and routed to ensure the material reaches your location via the most practical, cost-effective transit corridor available for Navsari. |
| Freight Configuration | Material bundling is mathematically structured based on volumetric weight to secure the most competitive commercial freight rates per metric ton for your specific district. |
| On-Site Readiness | All necessary transit clearances, technical test certificates and weight records are compiled and shared directly with your procurement team upon vehicle dispatch. |
Procurement Assurance: By managing end-to-end transit dynamics directly to your location, we eliminate unnecessary supply chain middleman costs and protect your project's strict implementation deadlines in Navsari.
Our distribution model is structured to facilitate rapid on-site offloading directly to major project coordinates, localised industrial estates and transit warehouses throughout Navsari and surrounding economic belts in Gujarat. The regional infrastructure focus — Delhi–Mumbai Expressway DMIC and port corridors — aligns directly with our Road Studs or Cat's Eye supply profile. We provide comprehensive pan-India technical support to streamline your material onboarding and installation timelines.
Q1: What is the usual lead time for Road Studs or Cat's Eye dispatched to Navsari?
For standard consignments, the road transit window from our Kolkata factory is typically 6-7 days. Bulk-tonnage rail dispatch is routed through the Ahmedabad goods yard. Priority despatch is available for tender deadlines.
Q2: Does the Road Studs or Cat's Eye supplied to Navsari meet IRC / MoRTH / IS specifications?
Yes. Every supply is manufactured to the applicable IRC, MoRTH and IS specifications. Test certificates, coating reports and inspection-support documents accompany every dispatch — prepared for tender and consultant review.
Q3: Can Road Studs or Cat's Eye be integrated with existing project infrastructure in Navsari?
Yes. Our systems are built for compatibility with standard mounting hardware, project-spec accessories and supporting structural elements. Drawings and technical support are included free of charge.
Streamline your procurement pipeline today. Call or message our team to receive a detailed BOQ quotation and direct factory pricing — no middlemen, no routing.
Common Questions
Auroguard Private Limited is a leading manufacturer and supplier of Road Studs or Cat's Eye in Navsari and across India, supplying direct from the factory to NHAI, MoRTH, PWD, EPC contractors and industrial buyers — no middlemen.
Typical transit for Road Studs or Cat's Eye to Navsari is 6-7 days depending on order size and finish, dispatched via the most practical corridor. Urgent tender-time dispatch can be arranged on confirmation.
Yes. Road Studs or Cat's Eye supplied by Auroguard in Navsari is manufactured to the applicable MoRTH, IRC and IS specifications, with material test certificates and tender documentation provided on request.
Yes. Auroguard regularly handles bulk and tender quantities of Road Studs or Cat's Eye in Navsari for national highways, state highways, smart-city programs, industrial estates and EPC works.
Yes. Every supply of Road Studs or Cat's Eye in Navsari is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
You deal directly with the desk that quotes, manufactures and ships — factory-direct pricing, engineered finishes, BOQ-ready quotations and pan-India dispatch to Navsari, with no middlemen.
Also in Navsari
Heavy-duty, high-visibility cast aluminum alloy road markers engineered with dual-directional reflective lenses and solid anchoring stems for permanent highway lane delineation.
View details
Buy certified retroreflective road sign boards from Auroguard Private Limited. Fully compliant with MORT&H Section 800 standards for highway safety.
View details
Buy certified high-visibility thermoplastic road marking paint from Auroguard Private Limited. Fully compliant with MORT&H Section 803 specifications.
View detailsQuantity, destination and specification — we respond directly.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.