Road Safety & Highway Barriers · Jehanabad
Auroguard supplies Guard Rail in Jehanabad, Bihar direct from our factory. Hot-dip galvanized steel W-beam safety guard rails engineered to MORT&H and IS:2062 specifications for roadside edge protection, embankment safety, and low-to-medium impact containment.
Direct Manufacturer Supply
Auroguard Private Limited manufactures premium-grade road Guard Rails, structurally engineered to protect vehicles from hazardous roadside terrain, steep embankments, and sharp turns. Cold-formed from high-tensile structural steel into a precise W-beam profile, these safety barriers act as a continuous, energy-absorbing shield. Upon vehicular impact, the guard rail flexes dynamically, absorbing the kinetic energy and safely redirecting the vehicle parallel to the roadway layout to prevent catastrophic off-road deviations. Every rail segment, standard post, and spacer block undergoes heavy hot-dip galvanization to ensure long-term structural immunity against severe outdoor weathering, making it the ideal protective choice for national highway shoulders, rural access roads, industrial perimeters, and mountain passes.
For Jehanabad projects, Auroguard delivers Guard Rail with a typical transit window of 3-4 days via the most cost-effective corridor. Finish and packaging are matched to flood-plain alluvial soils requiring sub-grade reinforcement — supporting corridors such as NH-19 Golden Quadrilateral and PMGSY rural road upgrades.
In the East India region the focus is East-West expressway upgrades and Ganga bridges. Auroguard supplies against BOQ, chainage schedule or tender extract — directly from the engineering desk that quotes your project.
Technical Specifications
| Specification | Value |
|---|---|
| Material Base Grade | High-Yield Structural Steel conforming to IS:2062 / ASTM A36 Standard Specs |
| Barrier Profile Patterns | Standard W-Beam (Dual Corrugation) Visual Profiling |
| Base Sheet Thickness | 2.67 mm \| 3.00 mm Heavy Impact Engineering Gauges |
| Standard Rail Length | 4.318 Meters Effective Length (Custom Section Lengths Available) |
| Supporting Post Profiles | Rigid C-Post \| Standard Sigma-Post Structural Sections |
| Zinc Galvanization Mass | Certified 550 g/m² up to 610 g/m² Hot-Dip Protective Layer (IS:2629) |
| Fastener Hardware Fittings | High-Tensile Grade 4.6 / 8.8 Splice Bolt Assembly Kits |
| Standard Code Compliance | Fully Conforms to MORT&H Clauses and AASHTO M180 Directives |
| Primary Infrastructure Utility | National Highway Shoulders, Rural Road Edges, Industrial Boundary Safety |
Auroguard Private Limited fabricates Guard Rail for road, highway, industrial and institutional projects across Jehanabad and the wider East India region. Engineered to the applicable IRC, MoRTH and IS specifications, every consignment is finished for flood-plain alluvial soils requiring sub-grade reinforcement and dispatched factory-direct — with no third-party markup.
From expressway works to industrial estates, our Guard Rail supports projects on corridors such as NH-19 Golden Quadrilateral and PMGSY rural road upgrades. Forward your tender extract and the engineering desk quotes your Jehanabad project directly.
Industrial procurement mandates precision. Our Guard Rail is manufactured with strict adherence to rigorous engineering criteria, ensuring hassle-free approval for your official public works or corporate tenders in Jehanabad. Below are the verified technical specifications for this product:
| Specification | Value |
|---|---|
| Material Base Grade | High-Yield Structural Steel conforming to IS:2062 / ASTM A36 Standard Specs |
| Barrier Profile Patterns | Standard W-Beam (Dual Corrugation) Visual Profiling |
| Base Sheet Thickness | 2.67 mm \| 3.00 mm Heavy Impact Engineering Gauges |
| Standard Rail Length | 4.318 Meters Effective Length (Custom Section Lengths Available) |
| Supporting Post Profiles | Rigid C-Post \| Standard Sigma-Post Structural Sections |
| Zinc Galvanization Mass | Certified 550 g/m² up to 610 g/m² Hot-Dip Protective Layer (IS:2629) |
| Fastener Hardware Fittings | High-Tensile Grade 4.6 / 8.8 Splice Bolt Assembly Kits |
| Standard Code Compliance | Fully Conforms to MORT&H Clauses and AASHTO M180 Directives |
| Primary Infrastructure Utility | National Highway Shoulders, Rural Road Edges, Industrial Boundary Safety |
All specifications conform to applicable IRC, MORTH, IS and project-specific tender requirements. Mill test certificates, dimensional reports and inspection support documents accompany every dispatch.
Procurement economics rely heavily on localised efficiency. To ensure the lowest possible landing costs and predictable delivery timelines, Auroguard Private Limited coordinates all material dispatches to align perfectly with your specific project site logistics in Jehanabad.
| Logistics Parameter | Project Execution Protocol |
|---|---|
| Primary Destination | Direct, on-site offloading at your active project coordinates or commercial storage yards anywhere within Jehanabad and surrounding zones. |
| Supply Chain Routing | Consignments are systematically optimised and routed to ensure the material reaches your location via the most practical, cost-effective transit corridor available for Jehanabad. |
| Freight Configuration | Material bundling is mathematically structured based on volumetric weight to secure the most competitive commercial freight rates per metric ton for your specific district. |
| On-Site Readiness | All necessary transit clearances, technical test certificates and weight records are compiled and shared directly with your procurement team upon vehicle dispatch. |
Procurement Assurance: By managing end-to-end transit dynamics directly to your location, we eliminate unnecessary supply chain middleman costs and protect your project's strict implementation deadlines in Jehanabad.
Our distribution model is structured to facilitate rapid on-site offloading directly to major project coordinates, localised industrial estates and transit warehouses throughout Jehanabad and surrounding economic belts in Bihar. The regional infrastructure focus — East-West expressway upgrades and Ganga bridges — aligns directly with our Guard Rail supply profile. We provide comprehensive pan-India technical support to streamline your material onboarding and installation timelines.
Q1: What is the standard lead time for Guard Rail delivered to Jehanabad?
For standard consignments, the road transit window from our Kolkata factory is approximately 3-4 days. Bulk-tonnage rail dispatch is routed through the Patna goods yard. Faster dispatch can be organised on request.
Q2: Does the Guard Rail supplied to Jehanabad meet IRC / MoRTH / IS specifications?
Yes. Every supply is produced to the applicable IRC, MoRTH and IS specifications. Material test certificates, coating reports and inspection-support documents accompany every dispatch — formatted for procurement sign-off.
Q3: Can Guard Rail be fitted to existing project infrastructure in Jehanabad?
Yes. Our systems are engineered for compatibility with standard mounting hardware, project-spec accessories and supporting structural elements. Fitment guidance and drawings come at no extra cost.
Move your Jehanabad project forward today. Contact our commercial sales desk to receive custom technical drawings and direct factory pricing — with no third-party markup.
Common Questions
Auroguard Private Limited is a leading manufacturer and supplier of Guard Rail in Jehanabad and across India, supplying direct from the factory to NHAI, MoRTH, PWD, EPC contractors and industrial buyers — no middlemen.
Typical transit for Guard Rail to Jehanabad is 3-4 days depending on order size and finish, dispatched via the most practical corridor. Urgent tender-time dispatch can be arranged on confirmation.
Yes. Guard Rail supplied by Auroguard in Jehanabad is manufactured to the applicable MoRTH, IRC and IS specifications, with material test certificates and tender documentation provided on request.
Yes. Auroguard regularly handles bulk and tender quantities of Guard Rail in Jehanabad for national highways, state highways, smart-city programs, industrial estates and EPC works.
Yes. Every supply of Guard Rail in Jehanabad is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
You deal directly with the desk that quotes, manufactures and ships — factory-direct pricing, engineered finishes, BOQ-ready quotations and pan-India dispatch to Jehanabad, with no middlemen.
Also in Jehanabad
High-containment hot-dip galvanized steel Thrie-beam and W-beam systems engineered to EN 1317 specifications for high-speed expressways, flyovers, and central median splitters.
View details
Industrial-grade cold-rolled hot-dip galvanized steel corrugated beam panels and structural components supplied for institutional infrastructure and B2B road safety projects.
View details
High-containment hot-dip galvanized steel triple-corrugation safety barriers engineered to MORT&H and EN 1317 specifications for heavy vehicle containment, high-speed expressways, and high-risk impact zones.
View details
Standard-containment hot-dip galvanized steel dual-corrugation safety barriers engineered to MORT&H and IS:2062 specifications for highway edge lines, sharp curves, and baseline vehicular containment.
View detailsQuantity, destination and specification — we respond directly.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.