Poles & Lighting Infrastructure · Jalandhar
Auroguard supplies High Mast Pole in Jalandhar, Punjab direct from our factory. Heavy-duty multi-lux galvanized steel polygonal high mast lighting structures engineered with automated internal winch raising-and-lowering systems for industrial ports, highways, and public arenas.
Direct Manufacturer Supply
Auroguard Private Limited manufactures elite-grade High Mast Poles, heavy engineering structures designed to illuminate massive public, commercial, and industrial zones with maximum area coverage and zero structural compromise. Fabricated from premium high-yield carbon steel sheets, these soaring structures feature a continuously tapered polygonal geometry (typically 12-sided, 16-sided, or 20-sided) designed to withstand extreme dynamic wind forces and aerodynamic vortex shedding. Each high mast is supplied as a modular, stress-fit slip-joint system containing an integrated, internal motorized stainless steel winch raising-and-lowering mechanism. This specialized gear assembly allows the top headframe luminaire carriage ring to be lowered safely to ground level, eliminating the need for expensive cherry-picker cranes or hazardous high-altitude maintenance climbs. Fully hot-dip galvanized for complete long-term protection against harsh atmospheric corrosion, they are universally specified for critical regional infrastructure hubs—including commercial sea ports, international airport runways, high-speed national highway interchanges, industrial rail yards, and massive open-air sports stadium plazas.
For Jalandhar projects, Auroguard delivers High Mast Pole with a typical transit window of 5-6 days via the most cost-effective corridor. Finish and packaging are matched to plains with seasonal frost and waterlogging risk — supporting corridors such as NH-44 Golden Quadrilateral and Delhi–Amritsar–Katra Expressway.
In the North India region the focus is Delhi–Amritsar–Katra Expressway works. Auroguard supplies against BOQ, chainage schedule or tender extract — directly from the engineering desk that quotes your project.
Technical Specifications
| Specification | Value |
|---|---|
| Material Base Grade | High-Yield Structural Carbon Steel conforming to IS:2062 \| S355 / ASTM A572 Standards |
| Structural Geometry | Continuously Tapered Polygonal Section (12, 16, or 20 Symmetrical Longitudinal Sides) |
| Pole Installation Heights | 12.00 Meters \| 16.00 Meters \| 20.00 Meters \| 25.00 Meters \| 30.00 Meters \| 40.00 Meters Large Spans |
| Assembly Joining Method | High-Precision Mechanical Slip-Fit Jointing Overlap Systems (No Site Welding Required) |
| Winch Raising Mechanism | Internal Motorized Stainless Steel Dual-Drum Wire Rope Winch with Self-Lubricating Power Pack |
| Zinc Galvanization Layer Mass | Certified Minimum 610 g/m² Heavy Hot-Dip Coating (IS:2629 / IS:4759 Standards) |
| Luminaire Carriage Configuration | High-Capacity Aerodynamic Steel Ring and Headframe for 4 to 24 Heavy Floodlights |
| Wind Speed Design Load | Standard Structural Integrity rated up to 180 km/h (Custom Engineered up to 220 km/h) |
| Primary Infrastructure Utility | Container Sea Ports, Airport Aprons, National Highway Interchanges, Open-Air Stadium Plazas |
Auroguard Private Limited manufactures High Mast Pole for road, highway, industrial and institutional projects across Jalandhar and the wider North India region. Manufactured to the applicable IRC, MoRTH and IS specifications, every consignment is treated for plains with seasonal frost and waterlogging risk and dispatched factory-direct — no middlemen, no routing.
From state highway upgrades to smart-city programs, our High Mast Pole supports projects on corridors such as NH-44 Golden Quadrilateral and Delhi–Amritsar–Katra Expressway. Share your BOQ and the engineering desk quotes your Jalandhar project directly.
Industrial procurement mandates precision. Our High Mast Pole is manufactured with strict adherence to rigorous engineering criteria, ensuring hassle-free approval for your official public works or corporate tenders in Jalandhar. Below are the verified technical specifications for this product:
| Specification | Value |
|---|---|
| Material Base Grade | High-Yield Structural Carbon Steel conforming to IS:2062 \| S355 / ASTM A572 Standards |
| Structural Geometry | Continuously Tapered Polygonal Section (12, 16, or 20 Symmetrical Longitudinal Sides) |
| Pole Installation Heights | 12.00 Meters \| 16.00 Meters \| 20.00 Meters \| 25.00 Meters \| 30.00 Meters \| 40.00 Meters Large Spans |
| Assembly Joining Method | High-Precision Mechanical Slip-Fit Jointing Overlap Systems (No Site Welding Required) |
| Winch Raising Mechanism | Internal Motorized Stainless Steel Dual-Drum Wire Rope Winch with Self-Lubricating Power Pack |
| Zinc Galvanization Layer Mass | Certified Minimum 610 g/m² Heavy Hot-Dip Coating (IS:2629 / IS:4759 Standards) |
| Luminaire Carriage Configuration | High-Capacity Aerodynamic Steel Ring and Headframe for 4 to 24 Heavy Floodlights |
| Wind Speed Design Load | Standard Structural Integrity rated up to 180 km/h (Custom Engineered up to 220 km/h) |
| Primary Infrastructure Utility | Container Sea Ports, Airport Aprons, National Highway Interchanges, Open-Air Stadium Plazas |
All specifications conform to applicable IRC, MORTH, IS and project-specific tender requirements. Mill test certificates, dimensional reports and inspection support documents accompany every dispatch.
Procurement economics rely heavily on localised efficiency. To ensure the lowest possible landing costs and predictable delivery timelines, Auroguard Private Limited coordinates all material dispatches to align perfectly with your specific project site logistics in Jalandhar.
| Logistics Parameter | Project Execution Protocol |
|---|---|
| Primary Destination | Direct, on-site offloading at your active project coordinates or commercial storage yards anywhere within Jalandhar and surrounding zones. |
| Supply Chain Routing | Consignments are systematically optimised and routed to ensure the material reaches your location via the most practical, cost-effective transit corridor available for Jalandhar. |
| Freight Configuration | Material bundling is mathematically structured based on volumetric weight to secure the most competitive commercial freight rates per metric ton for your specific district. |
| On-Site Readiness | All necessary transit clearances, technical test certificates and weight records are compiled and shared directly with your procurement team upon vehicle dispatch. |
Procurement Assurance: By managing end-to-end transit dynamics directly to your location, we eliminate unnecessary supply chain middleman costs and protect your project's strict implementation deadlines in Jalandhar.
Our distribution model is structured to facilitate rapid on-site offloading directly to major project coordinates, localised industrial estates and transit warehouses throughout Jalandhar and surrounding economic belts in Punjab. The regional infrastructure focus — Delhi–Amritsar–Katra Expressway works — aligns directly with our High Mast Pole supply profile. We provide comprehensive pan-India technical support to streamline your material onboarding and installation timelines.
Q1: What is the typical lead time for High Mast Pole shipped to Jalandhar?
For standard consignments, the road transit window from our Kolkata factory is around 5-6 days. Bulk-tonnage rail dispatch is routed through the Ludhiana goods yard. Urgent tender-time dispatch can be arranged on confirmation.
Q2: Does the High Mast Pole supplied to Jalandhar meet IRC / MoRTH / IS specifications?
Yes. Every supply is fabricated to the applicable IRC, MoRTH and IS specifications. Mill test certificates, coating reports and inspection-support documents accompany every dispatch — ready for direct submission to project consultants.
Q3: Can High Mast Pole be matched to existing project infrastructure in Jalandhar?
Yes. Our systems are designed for compatibility with standard mounting hardware, project-spec accessories and supporting structural elements. Installation drawings and technical clarifications are provided at no additional cost.
Get your Jalandhar requirement quoted fast. Reach the Auroguard desk directly to receive an itemised material breakdown and direct factory pricing — straight from the people who manufacture and ship.
Common Questions
Auroguard Private Limited is a leading manufacturer and supplier of High Mast Pole in Jalandhar and across India, supplying direct from the factory to NHAI, MoRTH, PWD, EPC contractors and industrial buyers — no middlemen.
Typical transit for High Mast Pole to Jalandhar is 5-6 days depending on order size and finish, dispatched via the most practical corridor. Urgent tender-time dispatch can be arranged on confirmation.
Yes. High Mast Pole supplied by Auroguard in Jalandhar is manufactured to the applicable MoRTH, IRC and IS specifications, with material test certificates and tender documentation provided on request.
Yes. Auroguard regularly handles bulk and tender quantities of High Mast Pole in Jalandhar for national highways, state highways, smart-city programs, industrial estates and EPC works.
Yes. Every supply of High Mast Pole in Jalandhar is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
You deal directly with the desk that quotes, manufactures and ships — factory-direct pricing, engineered finishes, BOQ-ready quotations and pan-India dispatch to Jalandhar, with no middlemen.
Also in Jalandhar
Continuously tapered, aerodynamic hot-dip galvanized steel poles engineered for architectural street lighting, smart city surveillance, and high-wind structural resilience.
View details
Modern 8-sided continuously tapered hot-dip galvanized steel poles engineered for stable street lighting, urban CCTV surveillance, and high-wind structural resilience.
View details
Tubular steel poles for utility, lighting and industrial applications.
View detailsQuantity, destination and specification — we respond directly.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.