Geosynthetics & Erosion Control · Gautam Buddha Nagar
Auroguard supplies Dimple Board in Gautam Buddha Nagar, Uttar Pradesh direct from our factory. High-density polyethylene (HDPE) dimpled drainage board engineered for sub-surface water management, foundation waterproofing protection, and structural drainage enhancement.
Direct Manufacturer Supply
Auroguard Private Limited manufactures high-performance Dimple Boards (Dimpled Drainage Sheets), structurally engineered from premium high-density polyethylene (HDPE) resins to form a continuous, vacuum-molded studded profile. These uniform, dimpled studs create a permanent, highly efficient air gap channel between the structural masonry wall and the backfilled soil layer, allowing subsurface seepage water to flow smoothly and gravity-drain down to the main perimeter collector systems. Engineered to withstand high compressive soil pressures during deep backfilling operations, our dimple sheets also serve as a high-strength mechanical buffer shield that prevents sharp stones and debris from puncturing primary chemical waterproofing membranes. It is universally specified across major civil infrastructure works—acting as the definitive structural drainage and protection layer for deep basement retaining walls, cut-and-cover underground tunnels, podium decks, bridge abutments, and intensive green rooftop drainage beds.
For Gautam Buddha Nagar projects, Auroguard delivers Dimple Board with a typical transit window of 4-5 days via the most cost-effective corridor. Finish and packaging are matched to plains alluvium with seasonal sub-grade weakening — supporting corridors such as Purvanchal Expressway, Ganga Expressway, NH-19.
In the North India region the focus is Bharatmala Phase-1 corridors and expressway upgrades. Auroguard supplies against BOQ, chainage schedule or tender extract — directly from the engineering desk that quotes your project.
Technical Specifications
| Specification | Value |
|---|---|
| Material Base Composition | 100% Virgin High-Density Polyethylene (HDPE) Core Resins |
| Molded Stud Dimple Height | 8.0 mm \| 10.0 mm \| 20.0 mm Standard Core Depths |
| Compressive Strength Scale | 150 kN/m² up to 400 kN/m² High Mechanical Loading Limits |
| Drainage Flow Capacity | High-Volume Subsurface Fluid Hydraulic Discharge Rates |
| Mass Per Unit Area Scale | 400 g/m² up to 800 g/m² Heavy-Duty Engineering Profiles |
| Chemical Resistance Index | Absolute Resistance to Soil Alkalies, Salts, Root Penetration, and Acids |
| Optional Backing Filter | Available Pre-Bonded with Non-Woven Polypropylene Geotextile Mesh |
| Standard Sheet Roll Width | 2.00 Meters \| 2.50 Meters Standard Application Layouts |
| Standard Sheet Roll Length | 20 Meters \| 30 Meters Continuous Compact Supply Rollers |
| Primary Infrastructure Utility | Underground Basement Retaining Walls, Cut-and-Cover Tunnels, Podium Deck Drainage |
Auroguard Private Limited manufactures Dimple Board for road, highway, industrial and institutional projects across Gautam Buddha Nagar and the wider North India region. Manufactured to the applicable IRC, MoRTH and IS specifications, every consignment is treated for plains alluvium with seasonal sub-grade weakening and dispatched factory-direct — no middlemen, no routing.
From state highway upgrades to smart-city programs, our Dimple Board supports projects on corridors such as Purvanchal Expressway, Ganga Expressway, NH-19. Share your BOQ and the engineering desk quotes your Gautam Buddha Nagar project directly.
Industrial procurement mandates precision. Our Dimple Board is manufactured with strict adherence to rigorous engineering criteria, ensuring hassle-free approval for your official public works or corporate tenders in Gautam Buddha Nagar. Below are the verified technical specifications for this product:
| Specification | Value |
|---|---|
| Material Base Composition | 100% Virgin High-Density Polyethylene (HDPE) Core Resins |
| Molded Stud Dimple Height | 8.0 mm \| 10.0 mm \| 20.0 mm Standard Core Depths |
| Compressive Strength Scale | 150 kN/m² up to 400 kN/m² High Mechanical Loading Limits |
| Drainage Flow Capacity | High-Volume Subsurface Fluid Hydraulic Discharge Rates |
| Mass Per Unit Area Scale | 400 g/m² up to 800 g/m² Heavy-Duty Engineering Profiles |
| Chemical Resistance Index | Absolute Resistance to Soil Alkalies, Salts, Root Penetration, and Acids |
| Optional Backing Filter | Available Pre-Bonded with Non-Woven Polypropylene Geotextile Mesh |
| Standard Sheet Roll Width | 2.00 Meters \| 2.50 Meters Standard Application Layouts |
| Standard Sheet Roll Length | 20 Meters \| 30 Meters Continuous Compact Supply Rollers |
| Primary Infrastructure Utility | Underground Basement Retaining Walls, Cut-and-Cover Tunnels, Podium Deck Drainage |
All specifications conform to applicable IRC, MORTH, IS and project-specific tender requirements. Mill test certificates, dimensional reports and inspection support documents accompany every dispatch.
Procurement economics rely heavily on localised efficiency. To ensure the lowest possible landing costs and predictable delivery timelines, Auroguard Private Limited coordinates all material dispatches to align perfectly with your specific project site logistics in Gautam Buddha Nagar.
| Logistics Parameter | Project Execution Protocol |
|---|---|
| Primary Destination | Direct, on-site offloading at your active project coordinates or commercial storage yards anywhere within Gautam Buddha Nagar and surrounding zones. |
| Supply Chain Routing | Consignments are systematically optimised and routed to ensure the material reaches your location via the most practical, cost-effective transit corridor available for Gautam Buddha Nagar. |
| Freight Configuration | Material bundling is mathematically structured based on volumetric weight to secure the most competitive commercial freight rates per metric ton for your specific district. |
| On-Site Readiness | All necessary transit clearances, technical test certificates and weight records are compiled and shared directly with your procurement team upon vehicle dispatch. |
Procurement Assurance: By managing end-to-end transit dynamics directly to your location, we eliminate unnecessary supply chain middleman costs and protect your project's strict implementation deadlines in Gautam Buddha Nagar.
Our distribution model is structured to facilitate rapid on-site offloading directly to major project coordinates, localised industrial estates and transit warehouses throughout Gautam Buddha Nagar and surrounding economic belts in Uttar Pradesh. The regional infrastructure focus — Bharatmala Phase-1 corridors and expressway upgrades — aligns directly with our Dimple Board supply profile. We provide comprehensive pan-India technical support to streamline your material onboarding and installation timelines.
Q1: What is the typical lead time for Dimple Board shipped to Gautam Buddha Nagar?
For standard consignments, the road transit window from our Kolkata factory is around 4-5 days. Bulk-tonnage rail dispatch is routed through the Lucknow goods yard. Urgent tender-time dispatch can be arranged on confirmation.
Q2: Does the Dimple Board supplied to Gautam Buddha Nagar meet IRC / MoRTH / IS specifications?
Yes. Every supply is fabricated to the applicable IRC, MoRTH and IS specifications. Mill test certificates, coating reports and inspection-support documents accompany every dispatch — ready for direct submission to project consultants.
Q3: Can Dimple Board be matched to existing project infrastructure in Gautam Buddha Nagar?
Yes. Our systems are designed for compatibility with standard mounting hardware, project-spec accessories and supporting structural elements. Installation drawings and technical clarifications are provided at no additional cost.
Get your Gautam Buddha Nagar requirement quoted fast. Reach the Auroguard desk directly to receive an itemised material breakdown and direct factory pricing — straight from the people who manufacture and ship.
Common Questions
Auroguard Private Limited is a leading manufacturer and supplier of Dimple Board in Gautam Buddha Nagar and across India, supplying direct from the factory to NHAI, MoRTH, PWD, EPC contractors and industrial buyers — no middlemen.
Typical transit for Dimple Board to Gautam Buddha Nagar is 4-5 days depending on order size and finish, dispatched via the most practical corridor. Urgent tender-time dispatch can be arranged on confirmation.
Yes. Dimple Board supplied by Auroguard in Gautam Buddha Nagar is manufactured to the applicable MoRTH, IRC and IS specifications, with material test certificates and tender documentation provided on request.
Yes. Auroguard regularly handles bulk and tender quantities of Dimple Board in Gautam Buddha Nagar for national highways, state highways, smart-city programs, industrial estates and EPC works.
Yes. Every supply of Dimple Board in Gautam Buddha Nagar is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
You deal directly with the desk that quotes, manufactures and ships — factory-direct pricing, engineered finishes, BOQ-ready quotations and pan-India dispatch to Gautam Buddha Nagar, with no middlemen.
Also in Gautam Buddha Nagar
High-performance three-dimensional UV-stabilized polymer erosion control mat engineered for slope stabilization, embankment protection, and root-reinforcement.
View details
Elite elastomeric bitumen-modified composite geomembrane engineered for heavy hydraulic barriers, waste containment, and high-puncture mining liner systems.
View details
Advanced flexible concrete-impregnated fabric engineered for rapid hydraulic lining, slope erosion control, and ditch armor applications without mixing or batching.
View details
100% biodegradable coir fiber erosion control blanket woven with natural jute organic netting for heavy-duty slope stabilization and sustainable vegetation establishment.
View detailsQuantity, destination and specification — we respond directly.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.