Poles & Lighting Infrastructure · Dahod
Auroguard supplies Conical Pole in Dahod, Gujarat direct from our factory. Continuously tapered, aerodynamic hot-dip galvanized steel poles engineered for architectural street lighting, smart city surveillance, and high-wind structural resilience.
Direct Manufacturer Supply
Auroguard Private Limited manufactures premium-grade Conical Poles, structurally optimized to deliver advanced structural engineering and modern aesthetics to urban infrastructure layouts. Fabricated from high-yield structural steel sheets, each pole is continuously tapered from a wide, stable base plate up to a slender top diameter using automated longitudinal welding lines. This aerodynamic, unjointed conical geometry provides exceptional resistance to dynamic wind forces and minimizes structural fatigue caused by vibrating cantilever arm loads. To counter the harsh atmospheric corrosion present across municipal highways, commercial developments, and industrial ports, every pole undergoes a strict hot-dip galvanization process. Featuring built-in weatherproof flush service doors for safe, easy terminal block wiring and earthing connections, our poles are universally specified across smart city projects, high-speed national highway lighting, public park plazas, and traffic signal monitoring junctions demanding long-term structural integrity.
For Dahod projects, Auroguard delivers Conical Pole with a typical transit window of 6-7 days via the most cost-effective corridor. Finish and packaging are matched to arid + coastal mix, salt-laden air near Kandla and Mundra — supporting corridors such as Delhi–Mumbai Expressway and Mumbai–Ahmedabad bullet train corridor.
In the West India region the focus is Delhi–Mumbai Expressway DMIC and port corridors. Auroguard supplies against BOQ, chainage schedule or tender extract — directly from the engineering desk that quotes your project.
Technical Specifications
| Specification | Value |
|---|---|
| Material Base Grade | High-Yield Structural Steel conforming to IS:2062 \/ ASTM A36 Standard Specs |
| Pole Geometric Design | Continuous Circular Conical Taper with No Circumferential Joints |
| Pole Installation Heights | 3.00 Meters up to 14.00 Meters Single-Section Engineering Spans |
| Base Sheet Thickness | 3.00 mm \| 4.00 mm \| 5.00 mm Heavy Engineering Gauges |
| Zinc Galvanization Mass | Certified Minimum 460 g/m² up to 610 g/m² Hot-Dip Coating (IS:2629 / IS:4759) |
| Welding Quality Matrix | Automatic Continuous Longitudinal Submerged Arc Welding (SAW) Lines |
| Service Door Layout | Weatherproof Flush-Fit Integrated Door with Anti-Theft Internal Locking System |
| Mounting Bracket Options | Single, Double, Triple, or Quad-Arm Cantilever Arrangements |
| Primary Infrastructure Utility | Smart City Street Lighting, Traffic Monitoring CCTV Surveillance, Highway Illumination |
Auroguard Private Limited manufactures Conical Pole for road, highway, industrial and institutional projects across Dahod and the wider West India region. Manufactured to the applicable IRC, MoRTH and IS specifications, every consignment is treated for arid + coastal mix, salt-laden air near Kandla and Mundra and dispatched factory-direct — no middlemen, no routing.
From state highway upgrades to smart-city programs, our Conical Pole supports projects on corridors such as Delhi–Mumbai Expressway and Mumbai–Ahmedabad bullet train corridor. Share your BOQ and the engineering desk quotes your Dahod project directly.
Industrial procurement mandates precision. Our Conical Pole is manufactured with strict adherence to rigorous engineering criteria, ensuring hassle-free approval for your official public works or corporate tenders in Dahod. Below are the verified technical specifications for this product:
| Specification | Value |
|---|---|
| Material Base Grade | High-Yield Structural Steel conforming to IS:2062 \/ ASTM A36 Standard Specs |
| Pole Geometric Design | Continuous Circular Conical Taper with No Circumferential Joints |
| Pole Installation Heights | 3.00 Meters up to 14.00 Meters Single-Section Engineering Spans |
| Base Sheet Thickness | 3.00 mm \| 4.00 mm \| 5.00 mm Heavy Engineering Gauges |
| Zinc Galvanization Mass | Certified Minimum 460 g/m² up to 610 g/m² Hot-Dip Coating (IS:2629 / IS:4759) |
| Welding Quality Matrix | Automatic Continuous Longitudinal Submerged Arc Welding (SAW) Lines |
| Service Door Layout | Weatherproof Flush-Fit Integrated Door with Anti-Theft Internal Locking System |
| Mounting Bracket Options | Single, Double, Triple, or Quad-Arm Cantilever Arrangements |
| Primary Infrastructure Utility | Smart City Street Lighting, Traffic Monitoring CCTV Surveillance, Highway Illumination |
All specifications conform to applicable IRC, MORTH, IS and project-specific tender requirements. Mill test certificates, dimensional reports and inspection support documents accompany every dispatch.
Procurement economics rely heavily on localised efficiency. To ensure the lowest possible landing costs and predictable delivery timelines, Auroguard Private Limited coordinates all material dispatches to align perfectly with your specific project site logistics in Dahod.
| Logistics Parameter | Project Execution Protocol |
|---|---|
| Primary Destination | Direct, on-site offloading at your active project coordinates or commercial storage yards anywhere within Dahod and surrounding zones. |
| Supply Chain Routing | Consignments are systematically optimised and routed to ensure the material reaches your location via the most practical, cost-effective transit corridor available for Dahod. |
| Freight Configuration | Material bundling is mathematically structured based on volumetric weight to secure the most competitive commercial freight rates per metric ton for your specific district. |
| On-Site Readiness | All necessary transit clearances, technical test certificates and weight records are compiled and shared directly with your procurement team upon vehicle dispatch. |
Procurement Assurance: By managing end-to-end transit dynamics directly to your location, we eliminate unnecessary supply chain middleman costs and protect your project's strict implementation deadlines in Dahod.
Our distribution model is structured to facilitate rapid on-site offloading directly to major project coordinates, localised industrial estates and transit warehouses throughout Dahod and surrounding economic belts in Gujarat. The regional infrastructure focus — Delhi–Mumbai Expressway DMIC and port corridors — aligns directly with our Conical Pole supply profile. We provide comprehensive pan-India technical support to streamline your material onboarding and installation timelines.
Q1: What is the typical lead time for Conical Pole shipped to Dahod?
For standard consignments, the road transit window from our Kolkata factory is around 6-7 days. Bulk-tonnage rail dispatch is routed through the Ahmedabad goods yard. Urgent tender-time dispatch can be arranged on confirmation.
Q2: Does the Conical Pole supplied to Dahod meet IRC / MoRTH / IS specifications?
Yes. Every supply is fabricated to the applicable IRC, MoRTH and IS specifications. Mill test certificates, coating reports and inspection-support documents accompany every dispatch — ready for direct submission to project consultants.
Q3: Can Conical Pole be matched to existing project infrastructure in Dahod?
Yes. Our systems are designed for compatibility with standard mounting hardware, project-spec accessories and supporting structural elements. Installation drawings and technical clarifications are provided at no additional cost.
Get your Dahod requirement quoted fast. Reach the Auroguard desk directly to receive an itemised material breakdown and direct factory pricing — straight from the people who manufacture and ship.
Common Questions
Auroguard Private Limited is a leading manufacturer and supplier of Conical Pole in Dahod and across India, supplying direct from the factory to NHAI, MoRTH, PWD, EPC contractors and industrial buyers — no middlemen.
Typical transit for Conical Pole to Dahod is 6-7 days depending on order size and finish, dispatched via the most practical corridor. Urgent tender-time dispatch can be arranged on confirmation.
Yes. Conical Pole supplied by Auroguard in Dahod is manufactured to the applicable MoRTH, IRC and IS specifications, with material test certificates and tender documentation provided on request.
Yes. Auroguard regularly handles bulk and tender quantities of Conical Pole in Dahod for national highways, state highways, smart-city programs, industrial estates and EPC works.
Yes. Every supply of Conical Pole in Dahod is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
You deal directly with the desk that quotes, manufactures and ships — factory-direct pricing, engineered finishes, BOQ-ready quotations and pan-India dispatch to Dahod, with no middlemen.
Also in Dahod
Heavy-duty multi-lux galvanized steel polygonal high mast lighting structures engineered with automated internal winch raising-and-lowering systems for industrial ports, highways, and public arenas.
View details
Modern 8-sided continuously tapered hot-dip galvanized steel poles engineered for stable street lighting, urban CCTV surveillance, and high-wind structural resilience.
View details
Tubular steel poles for utility, lighting and industrial applications.
View detailsQuantity, destination and specification — we respond directly.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.