Road Marking & Delineation · Car Nicobar
Auroguard supplies Road Studs or Cat's Eye in Car Nicobar, Andaman and Nicobar Islands direct from our factory. Buy high-visibility polycarbonate retroreflective road studs and cat's eyes from Auroguard Private Limited. Certified commercial highway markers.
Direct Manufacturer Supply
Auroguard Private Limited distributes commercial-grade Polycarbonate Retroreflective Road Studs, engineered for heavy-duty traffic delineation, lane division, and high-consequence night visibility. Molded from premium, high-impact structural polycarbonate resin, these highway markers exhibit exceptional compressive load-bearing capacity, sustaining repeated high-velocity impacts from heavy commercial vehicles without structural failure, cracking, or material displacement. The engineered mechanical design features a solid bottom anchoring stem or specialized ribbed base plates that anchor deep into asphalt or concrete substrates using high-strength structural epoxies, effectively preventing displacement caused by high-speed vehicular shear forces. The retroreflective surface integrates advanced microprismatic lens technology or highly reflective PMMA lenses hermetically sealed within the impact-resistant housing. This advanced optical configuration ensures superior wide-angle retroreflectivity under adverse weather, dense fog, and low-light conditions. As an elite supply chain specialist and distributor, Auroguard Private Limited ensures that all units meet strict manufacturing tolerances, offering optimal resistance to UV degradation, oil stains, and tire friction, thereby providing major infrastructure and municipal projects with exceptional long-term cost efficiencies.
For Car Nicobar projects, Auroguard delivers Road Studs or Cat's Eye with a typical transit window of 10-14 days via the most cost-effective corridor. Finish and packaging are matched to highest humidity, salt spray, cyclone exposure — supporting corridors such as NH-4 Andaman Trunk Road.
In the South India region the focus is island road safety + jetty links. Auroguard supplies against BOQ, chainage schedule or tender extract — directly from the engineering desk that quotes your project.
Technical Specifications
| Specification | Value |
|---|---|
| Material Base Composition | High-Strength Cast Aluminium Alloy (Conforming to ASTM B85 / IS 617) |
| Reflective Element Type | Microprismatic Polycarbonate Lens / PMMA Reflectors |
| Compressive Load Rating | Certified to withstand ≥ 20 Metric Tons |
| Regulatory Compliance | IRC:35 (Indian Roads Congress), ASTM D4280, EN 1463-1/2 |
| MORT&H Specifications | Section 800 (Traffic Signs, Markings & Appurtenances) |
| Lens Dimensions / Colors | Amber, White, Red (Bi-directional or Uni-directional) |
| Anchoring Mechanism | Integrated solid bottom stem (50 mm length) with structural epoxy bonding |
| Weathering Durability | UV-stabilized, high abrasion resistance, absolute water ingress protection |
Auroguard Private Limited fabricates Road Studs or Cat's Eye for road, highway, industrial and institutional projects across Car Nicobar and the wider South India region. Engineered to the applicable IRC, MoRTH and IS specifications, every consignment is finished for highest humidity, salt spray, cyclone exposure and dispatched factory-direct — with no third-party markup.
From expressway works to industrial estates, our Road Studs or Cat's Eye supports projects on corridors such as NH-4 Andaman Trunk Road. Forward your tender extract and the engineering desk quotes your Car Nicobar project directly.
Industrial procurement mandates precision. Our Road Studs or Cat's Eye is manufactured with strict adherence to rigorous engineering criteria, ensuring hassle-free approval for your official public works or corporate tenders in Car Nicobar. Below are the verified technical specifications for this product:
| Specification | Value |
|---|---|
| Material Base Composition | High-Strength Cast Aluminium Alloy (Conforming to ASTM B85 / IS 617) |
| Reflective Element Type | Microprismatic Polycarbonate Lens / PMMA Reflectors |
| Compressive Load Rating | Certified to withstand ≥ 20 Metric Tons |
| Regulatory Compliance | IRC:35 (Indian Roads Congress), ASTM D4280, EN 1463-1/2 |
| MORT&H Specifications | Section 800 (Traffic Signs, Markings & Appurtenances) |
| Lens Dimensions / Colors | Amber, White, Red (Bi-directional or Uni-directional) |
| Anchoring Mechanism | Integrated solid bottom stem (50 mm length) with structural epoxy bonding |
| Weathering Durability | UV-stabilized, high abrasion resistance, absolute water ingress protection |
All specifications conform to applicable IRC, MORTH, IS and project-specific tender requirements. Mill test certificates, dimensional reports and inspection support documents accompany every dispatch.
Procurement economics rely heavily on localised efficiency. To ensure the lowest possible landing costs and predictable delivery timelines, Auroguard Private Limited coordinates all material dispatches to align perfectly with your specific project site logistics in Car Nicobar.
| Logistics Parameter | Project Execution Protocol |
|---|---|
| Primary Destination | Direct, on-site offloading at your active project coordinates or commercial storage yards anywhere within Car Nicobar and surrounding zones. |
| Supply Chain Routing | Consignments are systematically optimised and routed to ensure the material reaches your location via the most practical, cost-effective transit corridor available for Car Nicobar. |
| Freight Configuration | Material bundling is mathematically structured based on volumetric weight to secure the most competitive commercial freight rates per metric ton for your specific district. |
| On-Site Readiness | All necessary transit clearances, technical test certificates and weight records are compiled and shared directly with your procurement team upon vehicle dispatch. |
Procurement Assurance: By managing end-to-end transit dynamics directly to your location, we eliminate unnecessary supply chain middleman costs and protect your project's strict implementation deadlines in Car Nicobar.
Our distribution model is structured to facilitate rapid on-site offloading directly to major project coordinates, localised industrial estates and transit warehouses throughout Car Nicobar and surrounding economic belts in Andaman and Nicobar Islands. The regional infrastructure focus — island road safety + jetty links — aligns directly with our Road Studs or Cat's Eye supply profile. We provide comprehensive pan-India technical support to streamline your material onboarding and installation timelines.
Q1: What is the standard lead time for Road Studs or Cat's Eye delivered to Car Nicobar?
For standard consignments, the road transit window from our Kolkata factory is approximately 10-14 days. Bulk-tonnage rail dispatch is routed through the Port Blair goods yard. Faster dispatch can be organised on request.
Q2: Does the Road Studs or Cat's Eye supplied to Car Nicobar meet IRC / MoRTH / IS specifications?
Yes. Every supply is produced to the applicable IRC, MoRTH and IS specifications. Material test certificates, coating reports and inspection-support documents accompany every dispatch — formatted for procurement sign-off.
Q3: Can Road Studs or Cat's Eye be fitted to existing project infrastructure in Car Nicobar?
Yes. Our systems are engineered for compatibility with standard mounting hardware, project-spec accessories and supporting structural elements. Fitment guidance and drawings come at no extra cost.
Move your Car Nicobar project forward today. Contact our commercial sales desk to receive custom technical drawings and direct factory pricing — with no third-party markup.
Common Questions
Auroguard Private Limited is a leading manufacturer and supplier of Road Studs or Cat's Eye in Car Nicobar and across India, supplying direct from the factory to NHAI, MoRTH, PWD, EPC contractors and industrial buyers — no middlemen.
Typical transit for Road Studs or Cat's Eye to Car Nicobar is 10-14 days depending on order size and finish, dispatched via the most practical corridor. Urgent tender-time dispatch can be arranged on confirmation.
Yes. Road Studs or Cat's Eye supplied by Auroguard in Car Nicobar is manufactured to the applicable MoRTH, IRC and IS specifications, with material test certificates and tender documentation provided on request.
Yes. Auroguard regularly handles bulk and tender quantities of Road Studs or Cat's Eye in Car Nicobar for national highways, state highways, smart-city programs, industrial estates and EPC works.
Yes. Every supply of Road Studs or Cat's Eye in Car Nicobar is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
You deal directly with the desk that quotes, manufactures and ships — factory-direct pricing, engineered finishes, BOQ-ready quotations and pan-India dispatch to Car Nicobar, with no middlemen.
Also in Car Nicobar
Heavy-duty, high-visibility cast aluminum alloy road markers engineered with dual-directional reflective lenses and solid anchoring stems for permanent highway lane delineation.
View details
Buy certified retroreflective road sign boards from Auroguard Private Limited. Fully compliant with MORT&H Section 800 standards for highway safety.
View details
Buy certified high-visibility thermoplastic road marking paint from Auroguard Private Limited. Fully compliant with MORT&H Section 803 specifications.
View detailsQuantity, destination and specification — we respond directly.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.