Road Marking & Delineation · Burdwan
Auroguard supplies Aluminium Road Studs in Burdwan, West Bengal direct from our factory. Heavy-duty, high-visibility cast aluminum alloy road markers engineered with dual-directional reflective lenses and solid anchoring stems for permanent highway lane delineation.
Direct Manufacturer Supply
Auroguard Private Limited manufactures premium-grade Aluminium Road Studs (raised pavement markers), structurally engineered to deliver maximum nocturnal visibility and traffic lane discipline on high-speed national highways, expressways, and dangerous flyover curves. Pressure die-cast from high-strength aircraft-grade aluminum alloy, these heavy-duty road reflectors feature an exceptional load-bearing capacity that easily withstands continuous pounding from heavy commercial multi-axle truck tyres without cracking or deforming. Equipped with advanced multi-vane retro-reflective prismatic lenses or glass beads on both faces, they reflect vehicle headlights with intense brightness from extreme distances, safely guiding drivers through heavy monsoonal downpours, thick winter fog, and unlit rural corridors. Every stud is designed with a contoured, aerodynamic profile that creates a distinct tactile and acoustic "rumble" warning when a vehicle veers out of its lane. Featuring a textured, solid bottom anchoring stem, our aluminum road markers ensure a permanent mechanical bond with asphalt or concrete pavements using high-viscosity epoxy resins.
For Burdwan projects, Auroguard delivers Aluminium Road Studs with a typical transit window of 2-3 days via the most cost-effective corridor. Finish and packaging are matched to high humidity and saline coastal exposure — supporting corridors such as Asian Highway 1 (Kolkata–Petrapole) and Bharatmala East-West corridor.
In the East India region the focus is port-linked road corridors and Bharatmala East-West connectivity. Auroguard supplies against BOQ, chainage schedule or tender extract — directly from the engineering desk that quotes your project.
Technical Specifications
| Specification | Value |
|---|---|
| Material Base Composition | Heavy-Duty Marine/Aircraft Grade Cast Aluminium Alloy Matrix |
| Reflector Lens Engineering | Dual-Directional High-Intensity Retro-Reflective PMMA Prismatic Lenses / Glass Element Inserts |
| Reflector Color Configurations | Crystal White, Vivid Amber Yellow, Emergency Red, Environmental Green |
| Compressive Load Capacity | High Structural Integrity Rated ≥ 20 up to 30 Metric Tons Failure Resistance |
| Anchor Stem Dimension | 50 mm \| 60 mm Length Solid Textured Anti-Twist Base Shank |
| Body Shell Dimensions | Standard 100 mm x 100 mm x 20 mm Low-Profile Aerodynamic Geometric Contour |
| Pavement Bond Profile | Grooved Slip-Resistant Bottom Pattern Optimized for Bituminous Epoxy Anchoring |
| Weathering Durability Index | Absolute Immunity to Ultraviolet (UV) Rays, Road Salts, Extreme Summer Heat, and Tyre Friction |
| Primary Infrastructure Utility | National Highway Lane Delineation, Expressway Median Edge Marking, Sharp Curve Boundaries, Airport Taxiway Guidance |
Auroguard Private Limited produces Aluminium Road Studs for road, highway, industrial and institutional projects across Burdwan and the wider East India region. Built to the applicable IRC, MoRTH and IS specifications, every consignment is prepared for high humidity and saline coastal exposure and dispatched factory-direct — direct from the desk that quotes and ships.
From national highway corridors to EPC contracts, our Aluminium Road Studs supports projects on corridors such as Asian Highway 1 (Kolkata–Petrapole) and Bharatmala East-West corridor. Send your requirement and the engineering desk quotes your Burdwan project directly.
Industrial procurement mandates precision. Our Aluminium Road Studs is manufactured with strict adherence to rigorous engineering criteria, ensuring hassle-free approval for your official public works or corporate tenders in Burdwan. Below are the verified technical specifications for this product:
| Specification | Value |
|---|---|
| Material Base Composition | Heavy-Duty Marine/Aircraft Grade Cast Aluminium Alloy Matrix |
| Reflector Lens Engineering | Dual-Directional High-Intensity Retro-Reflective PMMA Prismatic Lenses / Glass Element Inserts |
| Reflector Color Configurations | Crystal White, Vivid Amber Yellow, Emergency Red, Environmental Green |
| Compressive Load Capacity | High Structural Integrity Rated ≥ 20 up to 30 Metric Tons Failure Resistance |
| Anchor Stem Dimension | 50 mm \| 60 mm Length Solid Textured Anti-Twist Base Shank |
| Body Shell Dimensions | Standard 100 mm x 100 mm x 20 mm Low-Profile Aerodynamic Geometric Contour |
| Pavement Bond Profile | Grooved Slip-Resistant Bottom Pattern Optimized for Bituminous Epoxy Anchoring |
| Weathering Durability Index | Absolute Immunity to Ultraviolet (UV) Rays, Road Salts, Extreme Summer Heat, and Tyre Friction |
| Primary Infrastructure Utility | National Highway Lane Delineation, Expressway Median Edge Marking, Sharp Curve Boundaries, Airport Taxiway Guidance |
All specifications conform to applicable IRC, MORTH, IS and project-specific tender requirements. Mill test certificates, dimensional reports and inspection support documents accompany every dispatch.
Procurement economics rely heavily on localised efficiency. To ensure the lowest possible landing costs and predictable delivery timelines, Auroguard Private Limited coordinates all material dispatches to align perfectly with your specific project site logistics in Burdwan.
| Logistics Parameter | Project Execution Protocol |
|---|---|
| Primary Destination | Direct, on-site offloading at your active project coordinates or commercial storage yards anywhere within Burdwan and surrounding zones. |
| Supply Chain Routing | Consignments are systematically optimised and routed to ensure the material reaches your location via the most practical, cost-effective transit corridor available for Burdwan. |
| Freight Configuration | Material bundling is mathematically structured based on volumetric weight to secure the most competitive commercial freight rates per metric ton for your specific district. |
| On-Site Readiness | All necessary transit clearances, technical test certificates and weight records are compiled and shared directly with your procurement team upon vehicle dispatch. |
Procurement Assurance: By managing end-to-end transit dynamics directly to your location, we eliminate unnecessary supply chain middleman costs and protect your project's strict implementation deadlines in Burdwan.
Our distribution model is structured to facilitate rapid on-site offloading directly to major project coordinates, localised industrial estates and transit warehouses throughout Burdwan and surrounding economic belts in West Bengal. The regional infrastructure focus — port-linked road corridors and Bharatmala East-West connectivity — aligns directly with our Aluminium Road Studs supply profile. We provide comprehensive pan-India technical support to streamline your material onboarding and installation timelines.
Q1: What is the usual lead time for Aluminium Road Studs dispatched to Burdwan?
For standard consignments, the road transit window from our Kolkata factory is typically 2-3 days. Bulk-tonnage rail dispatch is routed through the Kolkata goods yard. Priority despatch is available for tender deadlines.
Q2: Does the Aluminium Road Studs supplied to Burdwan meet IRC / MoRTH / IS specifications?
Yes. Every supply is manufactured to the applicable IRC, MoRTH and IS specifications. Test certificates, coating reports and inspection-support documents accompany every dispatch — prepared for tender and consultant review.
Q3: Can Aluminium Road Studs be integrated with existing project infrastructure in Burdwan?
Yes. Our systems are built for compatibility with standard mounting hardware, project-spec accessories and supporting structural elements. Drawings and technical support are included free of charge.
Streamline your procurement pipeline today. Call or message our team to receive a detailed BOQ quotation and direct factory pricing — no middlemen, no routing.
Common Questions
Auroguard Private Limited is a leading manufacturer and supplier of Aluminium Road Studs in Burdwan and across India, supplying direct from the factory to NHAI, MoRTH, PWD, EPC contractors and industrial buyers — no middlemen.
Typical transit for Aluminium Road Studs to Burdwan is 2-3 days depending on order size and finish, dispatched via the most practical corridor. Urgent tender-time dispatch can be arranged on confirmation.
Yes. Aluminium Road Studs supplied by Auroguard in Burdwan is manufactured to the applicable MoRTH, IRC and IS specifications, with material test certificates and tender documentation provided on request.
Yes. Auroguard regularly handles bulk and tender quantities of Aluminium Road Studs in Burdwan for national highways, state highways, smart-city programs, industrial estates and EPC works.
Yes. Every supply of Aluminium Road Studs in Burdwan is accompanied by a GST invoice, dispatch challan and material test certificate for NHAI, MoRTH, PSU and EPC tender compliance.
You deal directly with the desk that quotes, manufactures and ships — factory-direct pricing, engineered finishes, BOQ-ready quotations and pan-India dispatch to Burdwan, with no middlemen.
Also in Burdwan
Buy certified retroreflective road sign boards from Auroguard Private Limited. Fully compliant with MORT&H Section 800 standards for highway safety.
View details
Buy high-visibility polycarbonate retroreflective road studs and cat's eyes from Auroguard Private Limited. Certified commercial highway markers.
View details
Buy certified high-visibility thermoplastic road marking paint from Auroguard Private Limited. Fully compliant with MORT&H Section 803 specifications.
View detailsQuantity, destination and specification — we respond directly.
Direct Manufacturer Desk
Share your BOQ or requirement — our engineering desk responds directly.
Sales & product help · Online