Epoxy Resin for Road Studs & Pavement Anchoring - Two-Component System India
Upload product image to /images/epoxy-resin.jpg
Road Markings & ConsumablesRoad Stud Adhesive
Auroguard supplies two-component epoxy resin systems for anchoring road studs, cats eyes, and delineator posts on asphalt and concrete road surfaces. The rapid-cure formulation achieves full bond strength within 2–4 hours at ambient temperature, resisting shear forces from heavy vehicle overrun. Also suitable for road repair and crack filling. Essential consumable supplied alongside road studs for NHAI and PWD road marking projects.
Technical Specifications
Parameter
Specification
Type
Two-component epoxy (Resin + Hardener)
Mix Ratio
2:1 or 1:1 by volume
Pot Life
20–30 min at 25°C
Full Cure
24–48 hours
Compressive Strength
60 MPa minimum (cured)
Bond Strength (asphalt)
3 MPa minimum
Pack Size
1kg, 5kg, 20kg sets
Frequently Asked Questions
How long does epoxy resin take to cure for road studs?
Auroguard's road stud epoxy has a pot life of 20–30 minutes for working time and achieves initial set in 2–4 hours at 25°C. Full cure for trafficking is achieved within 24–48 hours at ambient temperature.
What surface preparation is needed before epoxy application?
The road surface must be clean, dry and free from oil, loose material and dust. A primer is recommended on smooth concrete surfaces to improve bond strength.
Can epoxy resin be used on both asphalt and concrete?
Yes. Auroguard's two-component epoxy is suitable for bonding road studs to both asphalt and concrete road surfaces, achieving minimum 3 MPa bond strength on properly prepared asphalt.